EIA-310-E High-Density 42U Enclosures · 15-Minute Formal Quote Turnaround
MODEL CODE R42-6110SERIES HIGH-DENSITY 600 MMCATEGORY 600 mm vs 800 mm Wide

R42-6110 — 42U 600×1100 mm High-Density Standard Server Rack

23.6-inch (600 mm) wide × 43.3-inch (1,100 mm) deep 42U enclosure maximizing rack count per row on standard 600 mm raised-floor tiles without sacrificing rear cable and PDU clearance.

Request 15-Minute Formal Quote WhatsApp +86 13392250172Email jacklau@42urack.com

Dual-Unit Technical Specifications (R42-6110)

ParameterEngineering SpecificationReference / Notes
Rack Height42U usable (1,866.9 mm / 73.5 in)Exterior height 2,000 mm (78.7 in) on levelers
External Width × Depth600 × 1,100 mm (23.6 × 43.3 in)Exact 1-tile (600 mm / 24 in) raised-floor alignment
Adjustable Rail Depth160 – 940 mm (6.3 – 37.0 in)Accommodates 1U/2U compute servers up to 800 mm chassis length
Static / Rolling Load1,500 kg (3,307 lb) static / 1,000 kg (2,205 lb) rollingBuilt to EIA-310-E dimensional and static-load engineering standards
Perforation Open Area> 78% hexagonal meshSingle front perforated door + split rear perforated doors
Zero-U PDU MountingDual rear tool-less 0U PDU bracketsSupports 2× vertical 0U PDUs in rear corner bays
Side PanelsSplit 2-piece lockable steel side panelsQuick-release latches for single-technician handling
FinishRAL 9005 matte black powder coatOptional RAL 9003 white on project orders

Target Applications & Operating Fit

  • Enterprise 1U and 2U compute rows (Dell PowerEdge, HPE ProLiant, Supermicro 680–780 mm chassis) where floor-tile density matters
  • Raised-floor data centers aligned strictly to 600 mm (24-inch) perforated cold-aisle tiles
  • Branch core server rooms replacing older 1,000 mm cabinets with deeper 1,100 mm rear cord clearance
  • Rows needing 33% more 42U racks per linear aisle length compared to 800 mm wide footprints

Structural & Standards Engineering

  • Built to EIA-310-E dimensional and static-load engineering standards; structural load test documentation available per project
  • 1,100 mm depth adds 100 mm of dedicated rear cable and PDU bend margin over legacy 1,000 mm standard racks
  • Split rear doors open in a compact 300 mm radius, preserving tight 900–1,000 mm rear hot-aisle service corridors
  • Tool-less Zero-U PDU mounting slots integrate cleanly behind the rear vertical mounting uprights
  • Full-perimeter grounding continuity kit bonds front/rear doors and split side panels to the main frame

5-Parameter Engineering Modification Scope

  • Extended 1,200 mm depth variant (600 × 1,200 mm) for deep chassis in narrow 600 mm aisle slots
  • Pre-installed rear horizontal D-ring cable bars and brush pass-through roof plates
  • Baying kits for 600 mm center-to-center continuous rows with optional air-seal gaskets
  • Keyed-alike or unique cylinder locks, plus electronic access handle prep
  • Custom U-height factory-installed blanking panel kits (1U/2U snap-in steel or ABS)

Technical FAQs

When should I select the 600 mm wide R42-6110 over the 800 mm wide R42-8120?

Choose R42-6110 when your servers are standard 1U/2U compute nodes (under 800 mm deep) with moderate fiber counts and your primary constraint is fitting more racks along a 600 mm raised-floor tile grid. Choose R42-8120 for 850–960 mm GPU nodes or heavy copper/fiber bundles.

Can I fit two Zero-U vertical PDUs inside a 600 mm wide rack?

Yes. The R42-6110 includes dual rear vertical PDU mounting brackets positioned in the rear corner pockets behind the 19-inch rails, accommodating two standard-width 0U PDUs (one A-feed, one B-feed).

How much usable rear space remains behind a 760 mm deep 2U server?

With the front rails recessed 85 mm behind the front hex-mesh door, a 760 mm server leaves approximately 255 mm of rear space for C13/C19 power cords, rail cable management arms, and 0U PDU plugs.

Are side panels removable for baying multiple R42-6110 racks together?

Yes. The 2-piece half-height side panels lift off without tools once unlocked, and interior cabinets in a bayed row can be ordered without side panels to reduce ship weight and assembly time.

R42-8120

42U 800×1200 mm Extra-Deep AI GPU Server Rack

800×1200 mm extra-deep 42U AI GPU flagship with 1,500 kg (3,307 lb) static load, >78% hex-mesh airflow, and dual rear Zero-U PDU channels.

View Datasheet →
R42-8120-HD

42U 800×1200 mm 2,000 kg Heavy-Load Server Rack

Reinforced 800×1200 mm 42U welded frame engineered for 2,000 kg (4,409 lb) static loads, liquid-cooling manifolds, and seismic-ready anchoring.

View Datasheet →
R42-2B

42U 2-Bay (2×20U) Multi-Tenant Colocation Cabinet

42U 2-Bay (2×20U) colocation cabinet with solid steel tenant separation, independent front/rear locking, and isolated rear cable channels.

View Datasheet →